Guider IIS series User Guide | www.flashforge.com
suspend automatically. The function usually applied when you want to change
the filament at a certain point. (6-14) Click [Edit], then you can add or remove
a height.
6.2.11 File Menus
①
New Project
Click [File]--[New Project] can build a blank project. If there is an unsaved
modification on previous project, then it will inform you whether the
modification needs to be saved or not. Click [Yes] will save the modification,
while click [No] will abandon it. If click [Cancel] or close tool tip, then will
cancel the new project.
②
Saving
After finishing the model edit and adjustment, there are two ways below to
save all models in the scene.
Method 1:
Click [File]--[Save Project] in the menu bar to save the file as a project file
with the
“
.fpp
”
suffix, all models in the scene (include support) are
6-15
6-14