Remove front face by unplugging it gently from
the base
Fix the base on the wall.
Connect the thermostat following the picture below.If your
boiler is equipped with a thermostat input, remove the
bypass of 2 thermostat terminals and connect them respec-
tively to terminals 1 and 3 of the
THERMOFLASH DIGI 2
Eco
, to the 2 boiler’s thermostat inputs (any connection
scheme will do) .
ADJUSTMENT OPTIONS
You may
choose to put on or not the anti-lock system of
the circulation pump (
see device’s back face
when it is removed)
Circulation pump anti-lock system (starts the pump for 1 min
every 24hrs)
Put back the device on its base and tighten the screw.
TECHNICAL SPECIFICATIONS
- Adjustment range for comfort T°C
+5°C to +30°C
- Adjustment range for reduced T°C
+5°C to +30°C
- Adjustment range for holiday T°C
+5°C to +30°C
- Adjustment range for ambient T°C
0°C to +40°C
- Static differential: < 0.3 degrees
- Power : 2 standard LR6
alkaline
batteries
- Breaking power: Change over contact - 8 (3) A/250 V AC
- Operating temperature: 0°C to +50°C.
- Storage temperature: –10°C to +65°C
- Hygrometry : 85% max at + 20°C
- Degree of protection : IP 30
- Insulation class: II (EN 60730 standards)
- Connection : by screwed barrier up to 2.5 mm
2
.
Press the
button several times to obtain 6:00. The time
to the wall displayed advances by 30 minutes for each short
press. Continuous pressing accelerates the time run-off.
- Press the
button several times to obtain 8:00.
- Press the
button several times to obtain 12:00.
- Press the
button several times to obtain 14:00.
- Press the
button several times to obtain 18:00.
- Press the
button several times to obtain 22:00
N.B.
If you make a mistake (e.g. 11:30 instead of 12:00) use the
+ and - buttons to advance or return and correct with the
and thermometer
buttons.
Press the
"OK"
button. The following day automatically
appears.
Press
MODE
to return to automatic mode.
You can check your programming.
From
"Auto"
mode press the
"PROG P1-P4"
button.
With the
"DAYS 1-7"
button select the day from 1 to 7 and
check your programming on the 24-hour profile at the
bottom of the display panel (see example above).
Press
"MODE"
to return to automatic mode.
You pass into automatic mode by pressing the
"MODE"
button until the pointer
▲
appears
under
"Auto"
.
In automatic mode
THERMOFLASH DIGI 2
Eco
adapts to your life style by running the pro-
grams you have selected.
Manual mode transforms your device into a simple thermostat.
It allows you to maintain a constant temperature in your
dwelling (set to a temperature of between 5°C and 30°C).
Press the
"MODE"
button to position the pointer
▲
under
"Manu"
.
Press
+ or –
to adjust to the desired temperature (for
instance 22.5°C).
To quit the
"Manu"
mode, press
"MODE"
and re-position the
pointer
▲
under
"Auto"
.
In automatic mode this very useful
function allows you to modify ambi-
ent temperature temporarily.
- To increase the temperature, press
the
+
button (several times, if nec-
essary).
- To decrease the temperature press the
–
button (several
times, if necessary).
TEMPORARY TEMPERATURE MODIFICATION
"Manu" MANUAL MODE
"Auto" AUTOMATIC MODE
PROGRAMME READING
The current temperature level indicator (comfort or reduced)
will begin flashing.
This modification ends with the next change in programmed
temperature.
To return to the initial programme press
"Mode"
and re-position
the pointer
▲
under
"Auto"
.
The current temperature level indicator (comfort or reduced)
will stop flashing when the temporary modification comes to
an end.
This mode protects your dwelling from freezing by maintaining
a minimum adjustable temperature in your dwelling during
your absences
(from 1 to 99 days)
.
You can programme the length of your absence so that the
temperature rises for your return.
Press the case button
.
Set the length of your absence in days (from 1 to 99 days)
with the
+
and
–
buttons. The current day counts as one.
Validate with the
"OK"
button.
Set the desired temperature level during your absence with
the + and - buttons.
Validate with the
"OK"
button.
Remain in this mode.
To cancel and return to automatic Mode, press
"Mode"
.
The
THERMOFLASH DIGI 2 Eco
must be installed to an
inner wall about 1.50m up from floor level, away from direct
sunlight and any source of heat, such as: TV set, lighting,
draught, etc.
Pull cover down and remove the screw.
INSTALLER'S GUIDE
PROLONGED ABSENCE MODE (HOLIDAYS)
Auto Manu
1
2
3
4
5
6
7
°
c
°
c
+
-
MODE
OK
PROG
P1-P4
DAYS
1-7
MODE
Res
0
1
2
3
4
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
5
6
7
8
9
5
6
7
Auto Manu
°
c
☛ ☛
☛
☛
Auto Manu
1
2
3
4
5
6
7
°
c
°
c
+
-
MODE
OK
PROG
P1-P4
DAYS
1-7
MODE
0000
h
Res
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
MODE
MODE
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
☛
☛
☛
☛
☛
☛
☛
☛
☛ ☛
☛ ☛
Auto Manu
°
c
°
c
+
-
MODE
MODE
Auto Manu
°
c
☛
☛
☛
☛
☛ ☛
Auto Manu
°
c
+
-
0
1
2
3
4
5
°
c
☛
☛
☛
☛
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Auto Manu
1
2
3
4
5
6
7
°
c
+
-
OK
PROG
P1-P4
DAYS
1-7
MODE
Res
days
☛ ☛
☛
☛
☛
☛
☛
☛
2
!
➥
➥
■
■
Anti-lock stop feature
Anti-lock start feature
Prior to any operation, cut off mains power.
The wiring system diagram does not show the pro-
tections. Installation should be carried out by quali-
fied persons and should comply with current stan-
dards.
!
1
2
3
Terminal N° 1 = heating
