Automating setting of time/date and winter/sum-
mer time change using ref. 22299 antenna.
Hourly messages are sent from DCF77 transmitter
to the antenna out of Frankfurt (Germany).
Upon antenna's connection, the symbol
flashes
on screen. A soon as time has become synchro-
nous flashing stops.
In case of transmission failure or bad reception,
switch relies on its own internal time base.
Time is set manually.
Select the mode
with
menu
then
enter
.
Modify the day, month, year, the hour and the
minutes using
+
or
-
and
enter
.
The time switch next suggests the winter / summer
time changes
.
Select the type of change desired using
+
or
-
.
Validate with
enter
.
Programming may be done for each day or
for a group of days. In this case instructions are
common to several days.
Days: 1 = Monday, 2 = Tuesday, 3 =
Wednesday... 7 = Sunday.
1. Select the
prog
mode using
menu
,
then
enter
.
2. Select the day(s) using
+
or
-
. Validate with
enter
.
3.
ok
flashes. Use
enter
to validate the group.
4. Using
+
or
-
, select the state of the instruction:
On, Off or . Press
enter
to validate the state.
5. Enter the time of switch-on using
+
or
-
.
Validate with
enter
.
6. Enter minutes with
+
or
-
. Validate with
enter
.
7. For On , set the duration (seconds, then
minutes) in the same way as for the switch-on
schedule.
Program the other instructions of the group of
days by repeating operations 3 to 7.
The day or the group of days may be modified at
the during step 3 by pressing the
+
,
-
or .
At the end of programming return to
auto
mode using the
menu
button.
In this mode it is also possible to add an instruction
to the program set up.
Proceed as described above.
To check the daily profile set up without the risk of
modification or deletion:
Select the mode
using
menu
and press
ok
.
The first step of Monday is displayed as well as
the daily profile.
Two options available for display:
1. Pressing repeatedly
+
or
-
: lets you shift days.
In this case only the first daily step is displayed
as well as the daily profile.
2. Pressing
ok
: all steps of each day appear one
after the other.
Select the
prog
mode with
menu
and press
enter
.
Select the
modif
mode with
+
or
-
.
Validate with
enter
.
The number of remaining program steps appears
for a short time.
The first step of the first day or group of days
appears.
Repeatedly pressing the
enter
key displays all
programmed steps one at a time.
Any flashing field (state, hour, minutes) may be
modified using
+
or
-
, then validated with
enter
.
When the cursor is positioned on
OK
located
behind the group of days, you may display succes-
sively the days or the groups of days and switch
directly to the one that has to be modified using
+
or
-
.
To remove a program step: select the state of the
channel (One, Off or ), press simultaneously
+
and
-
.
Clear
appears on the screen. Validate with
enter
.
Makes it possible to remotely set temporary
Waivers.
When a 230V voltage is applied using a non
lighted push-button on connector 8, the state of the
time switch is reversed until the next program step.
The type of change depends on the geographical
zone.
Types available:
When the USER type is selected:
1. Enter the day then the month of the date of
change of the summer time (+ 1hour) with
+
or
-
and
enter
.
2. Enter the day then the month of the date of
change of the winter time (- 1hour) with
+
or
-
and
enter
.
The time switch will check which days of which
weeks correspond to these dates and will apply
changes to the same periods for the following
years independently of the date.
As soon as the key appears on the switch
appear on the screen.
Two types of operation:
A. Permanent override
:
Insert the key into the switch.
After 10 seconds the program contained in the
key will be executed without clearing the program
contained in the time switch.
As soon as the key is removed the program of the
time switch is again valid.
B. Copy (load) / Save (save):
The key makes it possible to save a program
contained in the time switch.
It is also possible to copy the contents of the key
into the clock.
1. Insert the key and wait for 2 sec.
2. Using menu select the mode:
save
to save a program contained in the time
switch,
load
to load the program of the key into the
time switch, to check the program contained
in the key.
3. Validate the selection with
enter
.
4. For
save
and
load
reconfirm with
enter
.
The following error messages may appear
on the screen:
no prog
: the key is empty, it does not contain
any program.
Error
: the key is that of a one-channel switch.
In these two cases:
●
Only the save
save
is possible.
●
The error message remains on display as long
as the key is present, but in this case the pro-
gram of the time switch is executed.
To prevent all undesirable actions, the keyboard
of the time switch may be locked using a key
réf. 23892 or pressing the
enter
and
keys
for 7 seconds.
Unlocking is done in the same way.
*
type according defect
The change always takes place between 2:00
and 3:00 a.m.
Programming:
prog new
Key
Entry of override
Locking
Setting time and day
Winter / summer time change
Display
Modification or clearing of a program
step:
prog modif
Type
Start of time
Start of time
Zone
change Summer change Winter
of application
Euro
Last Sunday
Last Sunday
European Union
of March
of October
USA
First Sunday
Last Sunday
North America
of April
of October
GB
Last Sunday
Fourth Sunday
Only for the
of March
of October
United Kingdom
USER
Date freely
Date freely
programmed
programmed
No
No No
change
change
*
Allows you to override the output, On or Off for
a given period.
Once done, this override will be removed and
will not be carried over to the following year.
Select the mode
using
menu
then
enter
.
With
+
or
-
, select the state of override: On or
Off,
ok
to validate.
Enter the day then the month of the starting per-
iod (date 1) using
+
or
-
then
enter
.
Enter in the same way the day and the month of
the ending period (date 2).
In auto mode,
flashes to indicate that a per-
iod of holidays was programmed.
becomes permanent during the period.
The override will be effective at 0:00 of the 1st
date until 23:59 from the 2nd date.
If date 1 is set before the day of programming,
the period of holidays is valid for the following
year.
To clear a period of holidays return to the mode,
press simultaneously the
+
and
-
keys.
Clear
appears. Confirm with
enter
.
Pressing repeatedly
-
.
If the state of the output is
On
:
1
st
pressure: temporary waiver.
Off
and
flash. The next program
step will let you return to the auto-
matic mode.
2
nd
pressure: permanent override.
On
and
are permanent. This override
must be cancelled manually.
3
rd
pressure: permanent override.
Off
and
are permanent. This override
must be cancelled manually.
4
th
pressure: random operation. Simulation of
presence, as well as the state of
the output are displayed. Must be
cancelled manually.
In this case the steps of the program
are shifted randomly within a range
of ± 59 min.
5
th
pressure: return to the automatic mode.
Holidays
Override -
Random operation
