Monotron 107 P
Time-switch
User’s guide
Monotron 107 P
The Monotron 107 P is a time-switch that lets you
automatically control an electrical equipment or an
electrical circuit from your mains panel. It is fully pro-
grammable, allowing you to save energy by choo-
sing the times at which the circuit is ON or OFF.
Your Flash Monotron 107 P
Display:
1.
Time
2.
Circuit status (
ON
or
OFF
)
3.
Day of the week to which
the program applies
(1=Monday, 2=Tuesday…
7=Sunday)
Buttons:
4.
ON/OFF:
chooses whe-
ther the circuit is ON or OFF.
5.
PROG
: sets programming
mode.
6.
RESET
: resets all
Monotron programs.
7.
PLUS
and
MINUS
:
changes settings.
Time and day setting
Ex: 8.59 - day 4 (Thursday)
With
+
or
–
, scroll through 24 hours for each day in
order to set the required day and time.
Installation guide
To program your time-switch
�
Press
PROG
.
The first switching time flashes.
�
Use the
+
and
-
buttons to select
the first switching time.
�
Use the
ON/OFF
button to choose between circuit
ON and circuit OFF.
�
Validate the time with the
PROG
key.
The figure 1 appears and
flashes.
This means that the day selec-
tion cursor is on the 1st day.
The 7 days are displayed,
thus they are selected for the
time programmed.
�
Use the + and - keys to move the cursor from day
to day.
1
= Monday,
2
= Tuesday,
3
= Wednesday,
4
= Thursday,
5
= Friday,
6
= Saturday,
7
= Sunday.
The flashing figure shows
which day is selected. (At
present the cursor is on the
2nd day)
One press on the on/off key
causes the day to disappear,
another press causes it to
reappear.
�
Enter your choice by pressing
PROG
.
Monotron automatically moves
to the next switching time which
can be affected to the different
days of the week.
NB: You can program up to
20 different timer settings.
If no buttons are pressed within
2 min.
, Monotron
switches back to automatic mode, without recording
your settings.
�
Program additional time settings
by repeating steps
2
to
6
,
above.
�
To record your settings, press
PROG
during 3 sec.
Monotron switches back to
automatic mode.
Permanent override
�
If you want to override the
circuit to
ON or OFF, all
you have to do is press the
ON/OFF
key.
The
ON or OFF display
flashes
�
By successive presses on
the
ON/OFF
key, you move from override to
ON to override to OFF or vice-versa
�
To exit from override mode and return to automa-
tic mode, press the
ON/OFF
key 3 times.
The
ON or OFF display stops flashing
To check your settings:
�
With Monotron in automatic mode:
�
Press
PROG
repeatedly to display the day, the time
and the circuit status (ON or OFF) for each of your
programs.
To reset Monotron:
�
Press the
RESET
button.
Warning: in case supply interruption, the
display flashing.
Technical specifications
• Supply voltage:
230 V ±10% 50 Hz.
• Lithium battery power reserve:
total of 3 years.
• Output:
voltage free changeover contact.
• Switching capacity:
resistive load:
16 A / 250 V AC.
inductive load:
3 A / 250 V AC cos
ϕ
= 0,6.
• Accuracy:
1 sec. / 24 h. to 20°C.
• Operating temperature:
– 10° C to + 50° C.
• Storage temperature:
– 10° C to + 60° C.
• Max humidity :
90 % at 20° C.
• Protection class:
IP 40.
• Insulation class:
II.
• Connection
tunnel terminals, conductor cross-section:
max. 4 mm
2
.
min. 0,5 mm
2
.
• Conformity with EN 60730.
1
2
3
Day
1
Day
2
Day
3
Day
4
Monotron 107 P
Time-switch
User’s guide
Monotron 107 P
The Monotron 107 P is a time-switch that lets you
automatically control an electrical equipment or an
electrical circuit from your mains panel. It is fully pro-
grammable, allowing you to save energy by choo-
sing the times at which the circuit is ON or OFF.
Your Flash Monotron 107 P
Display:
1.
Time
2.
Circuit status (
ON
or
OFF
)
3.
Day of the week to which
the program applies
(1=Monday, 2=Tuesday…
7=Sunday)
Buttons:
4.
ON/OFF:
chooses whe-
ther the circuit is ON or OFF.
5.
PROG
: sets programming
mode.
6.
RESET
: resets all
Monotron programs.
7.
PLUS
and
MINUS
:
changes settings.
Time and day setting
Ex: 8.59 - day 4 (Thursday)
With
+
or
–
, scroll through 24 hours for each day in
order to set the required day and time.
Installation guide
To program your time-switch
�
Press
PROG
.
The first switching time flashes.
�
Use the
+
and
-
buttons to select
the first switching time.
�
Use the
ON/OFF
button to choose between circuit
ON and circuit OFF.
�
Validate the time with the
PROG
key.
The figure 1 appears and
flashes.
This means that the day selec-
tion cursor is on the 1st day.
The 7 days are displayed,
thus they are selected for the
time programmed.
�
Use the + and - keys to move the cursor from day
to day.
1
= Monday,
2
= Tuesday,
3
= Wednesday,
4
= Thursday,
5
= Friday,
6
= Saturday,
7
= Sunday.
The flashing figure shows
which day is selected. (At
present the cursor is on the
2nd day)
One press on the on/off key
causes the day to disappear,
another press causes it to
reappear.
�
Enter your choice by pressing
PROG
.
Monotron automatically moves
to the next switching time which
can be affected to the different
days of the week.
NB: You can program up to
20 different timer settings.
If no buttons are pressed within
2 min.
, Monotron
switches back to automatic mode, without recording
your settings.
�
Program additional time settings
by repeating steps
2
to
6
,
above.
�
To record your settings, press
PROG
during 3 sec.
Monotron switches back to
automatic mode.
Permanent override
�
If you want to override the
circuit to
ON or OFF, all
you have to do is press the
ON/OFF
key.
The
ON or OFF display
flashes
�
By successive presses on
the
ON/OFF
key, you move from override to
ON to override to OFF or vice-versa
�
To exit from override mode and return to automa-
tic mode, press the
ON/OFF
key 3 times.
The
ON or OFF display stops flashing
To check your settings:
�
With Monotron in automatic mode:
�
Press
PROG
repeatedly to display the day, the time
and the circuit status (ON or OFF) for each of your
programs.
To reset Monotron:
�
Press the
RESET
button.
Warning: in case supply interruption, the
display flashing.
Technical specifications
• Supply voltage:
230 V ±10% 50 Hz.
• Lithium battery power reserve:
total of 3 years.
• Output:
voltage free changeover contact.
• Switching capacity:
resistive load:
16 A / 250 V AC.
inductive load:
3 A / 250 V AC cos
ϕ
= 0,6.
• Accuracy:
1 sec. / 24 h. to 20°C.
• Operating temperature:
– 10° C to + 50° C.
• Storage temperature:
– 10° C to + 60° C.
• Max humidity :
90 % at 20° C.
• Protection class:
IP 40.
• Insulation class:
II.
• Connection
tunnel terminals, conductor cross-section:
max. 4 mm
2
.
min. 0,5 mm
2
.
• Conformity with EN 60730.
1
2
3
Day
1
Day
2
Day
3
Day
4
Monotron 107 P
Time-switch
User’s guide
Monotron 107 P
The Monotron 107 P is a time-switch that lets you
automatically control an electrical equipment or an
electrical circuit from your mains panel. It is fully pro-
grammable, allowing you to save energy by choo-
sing the times at which the circuit is ON or OFF.
Your Flash Monotron 107 P
Display:
1.
Time
2.
Circuit status (
ON
or
OFF
)
3.
Day of the week to which
the program applies
(1=Monday, 2=Tuesday…
7=Sunday)
Buttons:
4.
ON/OFF:
chooses whe-
ther the circuit is ON or OFF.
5.
PROG
: sets programming
mode.
6.
RESET
: resets all
Monotron programs.
7.
PLUS
and
MINUS
:
changes settings.
Time and day setting
Ex: 8.59 - day 4 (Thursday)
With
+
or
–
, scroll through 24 hours for each day in
order to set the required day and time.
Installation guide
To program your time-switch
�
Press
PROG
.
The first switching time flashes.
�
Use the
+
and
-
buttons to select
the first switching time.
�
Use the
ON/OFF
button to choose between circuit
ON and circuit OFF.
�
Validate the time with the
PROG
key.
The figure 1 appears and
flashes.
This means that the day selec-
tion cursor is on the 1st day.
The 7 days are displayed,
thus they are selected for the
time programmed.
�
Use the + and - keys to move the cursor from day
to day.
1
= Monday,
2
= Tuesday,
3
= Wednesday,
4
= Thursday,
5
= Friday,
6
= Saturday,
7
= Sunday.
The flashing figure shows
which day is selected. (At
present the cursor is on the
2nd day)
One press on the on/off key
causes the day to disappear,
another press causes it to
reappear.
�
Enter your choice by pressing
PROG
.
Monotron automatically moves
to the next switching time which
can be affected to the different
days of the week.
NB: You can program up to
20 different timer settings.
If no buttons are pressed within
2 min.
, Monotron
switches back to automatic mode, without recording
your settings.
�
Program additional time settings
by repeating steps
2
to
6
,
above.
�
To record your settings, press
PROG
during 3 sec.
Monotron switches back to
automatic mode.
Permanent override
�
If you want to override the
circuit to
ON or OFF, all
you have to do is press the
ON/OFF
key.
The
ON or OFF display
flashes
�
By successive presses on
the
ON/OFF
key, you move from override to
ON to override to OFF or vice-versa
�
To exit from override mode and return to automa-
tic mode, press the
ON/OFF
key 3 times.
The
ON or OFF display stops flashing
To check your settings:
�
With Monotron in automatic mode:
�
Press
PROG
repeatedly to display the day, the time
and the circuit status (ON or OFF) for each of your
programs.
To reset Monotron:
�
Press the
RESET
button.
Warning: in case supply interruption, the
display flashing.
Technical specifications
• Supply voltage:
230 V ±10% 50 Hz.
• Lithium battery power reserve:
total of 3 years.
• Output:
voltage free changeover contact.
• Switching capacity:
resistive load:
16 A / 250 V AC.
inductive load:
3 A / 250 V AC cos
ϕ
= 0,6.
• Accuracy:
1 sec. / 24 h. to 20°C.
• Operating temperature:
– 10° C to + 50° C.
• Storage temperature:
– 10° C to + 60° C.
• Max humidity :
90 % at 20° C.
• Protection class:
IP 40.
• Insulation class:
II.
• Connection
tunnel terminals, conductor cross-section:
max. 4 mm
2
.
min. 0,5 mm
2
.
• Conformity with EN 60730.
1
2
3
Day
1
Day
2
Day
3
Day
4
Monotron 107 P
Time-switch
User’s guide
Monotron 107 P
The Monotron 107 P is a time-switch that lets you
automatically control an electrical equipment or an
electrical circuit from your mains panel. It is fully pro-
grammable, allowing you to save energy by choo-
sing the times at which the circuit is ON or OFF.
Your Flash Monotron 107 P
Display:
1.
Time
2.
Circuit status (
ON
or
OFF
)
3.
Day of the week to which
the program applies
(1=Monday, 2=Tuesday…
7=Sunday)
Buttons:
4.
ON/OFF:
chooses whe-
ther the circuit is ON or OFF.
5.
PROG
: sets programming
mode.
6.
RESET
: resets all
Monotron programs.
7.
PLUS
and
MINUS
:
changes settings.
Time and day setting
Ex: 8.59 - day 4 (Thursday)
With
+
or
–
, scroll through 24 hours for each day in
order to set the required day and time.
Installation guide
To program your time-switch
�
Press
PROG
.
The first switching time flashes.
�
Use the
+
and
-
buttons to select
the first switching time.
�
Use the
ON/OFF
button to choose between circuit
ON and circuit OFF.
�
Validate the time with the
PROG
key.
The figure 1 appears and
flashes.
This means that the day selec-
tion cursor is on the 1st day.
The 7 days are displayed,
thus they are selected for the
time programmed.
�
Use the + and - keys to move the cursor from day
to day.
1
= Monday,
2
= Tuesday,
3
= Wednesday,
4
= Thursday,
5
= Friday,
6
= Saturday,
7
= Sunday.
The flashing figure shows
which day is selected. (At
present the cursor is on the
2nd day)
One press on the on/off key
causes the day to disappear,
another press causes it to
reappear.
�
Enter your choice by pressing
PROG
.
Monotron automatically moves
to the next switching time which
can be affected to the different
days of the week.
NB: You can program up to
20 different timer settings.
If no buttons are pressed within
2 min.
, Monotron
switches back to automatic mode, without recording
your settings.
�
Program additional time settings
by repeating steps
2
to
6
,
above.
�
To record your settings, press
PROG
during 3 sec.
Monotron switches back to
automatic mode.
Permanent override
�
If you want to override the
circuit to
ON or OFF, all
you have to do is press the
ON/OFF
key.
The
ON or OFF display
flashes
�
By successive presses on
the
ON/OFF
key, you move from override to
ON to override to OFF or vice-versa
�
To exit from override mode and return to automa-
tic mode, press the
ON/OFF
key 3 times.
The
ON or OFF display stops flashing
To check your settings:
�
With Monotron in automatic mode:
�
Press
PROG
repeatedly to display the day, the time
and the circuit status (ON or OFF) for each of your
programs.
To reset Monotron:
�
Press the
RESET
button.
Warning: in case supply interruption, the
display flashing.
Technical specifications
• Supply voltage:
230 V ±10% 50 Hz.
• Lithium battery power reserve:
total of 3 years.
• Output:
voltage free changeover contact.
• Switching capacity:
resistive load:
16 A / 250 V AC.
inductive load:
3 A / 250 V AC cos
ϕ
= 0,6.
• Accuracy:
1 sec. / 24 h. to 20°C.
• Operating temperature:
– 10° C to + 50° C.
• Storage temperature:
– 10° C to + 60° C.
• Max humidity :
90 % at 20° C.
• Protection class:
IP 40.
• Insulation class:
II.
• Connection
tunnel terminals, conductor cross-section:
max. 4 mm
2
.
min. 0,5 mm
2
.
• Conformity with EN 60730.
1
2
3
Day
1
Day
2
Day
3
Day
4
Technical features:
Supply:
230 V~ +10/-15% 50 Hz
240V~ +/-6% 50Hz
Working reserve
by lithium battery:
3 years’ accumulation
for current breaking
Outlet:
1 reversing switch
Cut-off power:
Reductive load
16 A / 230 V~
Inductive load
3 A 230 V~ cos
ϕ
= 0.6
Time precision:
± 1 min per day at 20°C
Working temperature:
-10°C to +50°C
Storage temperature:
-10°C to +60°C
Max humidity
90 % at 20° C
Type of insulation:
II
Size:
1
0
(17,5 mm)
Protection degree:
IP20
Connection:
tunnel terminals,
conductor cross-section
max. 4 mm
2
min. 0,5 mm
2
Action type:
1B
Rated impulse withstand voltage:
4kV
Voltage and current declared for
the needs of EMC emissions tests:
230 V~ 0,5 A
Upstream circuit breaker:
16 A
Max. altitude:
2000 m
Software structure:
class A
Pollution category:
2
Independent panel-mounted (DIN rail) control device
Correct Disposal of This product
(Waste Electrical & Electronic Equipment).
(Applicable in the European Union and other European countries with separate
collection systems).
This marking shown on the product or its literature indicates that it hould not be
disposed with other household wasted at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take
this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes of disposal.
Usable in all Europe
å
and in Switzerland
6LE002373A
3
