ASSEMBLY INSTRUCTIONS
x 6
STEP 3
Attach post assembly to support brackets (G) using
6pcs bolts M6 X 30 (EE) and 6pcs M6 flange nuts
(CC). Tighten bolts securely.
Hardware Used
STEP 4
Load tank housing onto post, slide tank housing
down.
STEP 5
Remove the 4 pcs preassembled stainless steel bolts
(DD) from the burner assembly (C).
Insert the gas hose from the top end of the upper
post (E), then attach the burner assembly (C) to
upper post (E) using the four bolts removed at the
beginning of this step. Tighten bolts securely.
Hardware Used
Bolt M6x30
M6 Flange nut
Stainless steel bolt
x4
