www.flash-butrym.pl
Page 3
Check the product regularly for any damage to the mains cord! Should you discovery
any damage to the mains cord, do not operate or disconnect this product! Secure the product
against accidental operation and contact your specialized dealer!
Always separate the product from mains by holding the mains plug by the handling
surface. Never disconnect by holding the line cord! Be sure to connect the product exclusively
to 230V, 50Hz A/C!
Always ensure during installation, operation, transport and when storing the product
that the mains cord is not exposed to possible mechanical damage, or damage caused by
humidity, fluids, heat or cold!
The product’s cable entry must not be exposed to stress from pull! Create the mains
connection once the product has been installed only. Always connect the mains plug last!
The product must only be connected to a proper outlet of the public supply grid.
Connect the mains cord to suitable outlets only! Use extensions cords in compliance with
specifications only! Do not allow the mains cord to come into contact with other cords!
Ensure during installation, operation, transport and storage that none of the cables are
freely exposed! Never touch the mains cord, mains plug and outlets with wet or damp hands!
When not using the product, and prior to cleaning always disconnect the product from
mains! To do so, hold the mains plug by the handing surface and never pull the mains cord!
3. Housing
Always ensure during installation, operation, transport and when storing the product
that no shocks or other forces impact the housing!
The housing must not touch onto any other devices or objects during operation!
Easily flammable materials, e.g. decoration material and other surfaces and objects,
must maintain a minimum distance of 3m to the housing! Walls must maintain a minimum
distance of 50cm to the housing! The device must be installed on a fireproof surface only (no
carpet)! Always ensure a proper circulation of air.
Do not touch the housing during operation – it will heat up. The housing is safe to
touch approx. 5 minutes following the end of operation!
The device must never be carried via the projector arms. Use the carrying handles
only!
Fluids must not enter the housing as this could reduce the protective insulation and
may trigger short circuits which may lead to fatal electric shocks! If fluids have entered,
disconnect the mains plug immediately and secure the product against unintentional operation
and contact your specialized dealer! Damage caused as a result of fluids entering the housing
is exempt from warranty.
No metal parts or other items must enter the housing as this may reduce the protective
insulation or trigger short circuits which may lead to fatal electric shocks! If metal parts or
other items have entered, disconnect the mains plug immediately, secure the product against
unintentional operation and contact your specialized dealer! Damage caused by metal parts or
other items in the housing is exempt from warranty.
4. Operating Environment
The product must be operated and stored in a dry environment only! Splash water,
rain, humidity, fog may reduce the protective insulation which may lead to fatal electric
shocks! The limit value for relative humidity is 50% at 45*C. A minimum distance of 1,5m to
a fog machine must be observed; fog saturation in the room must not reduce the visibility to
below 10m.
