www.flash-butrym.pl
Strona 2
Please read this instruction manual carefully to become familiar with the basics of
using this device. The instructions contain important information about the use and
maintenance of equipment .
Warning:
To prevent or reduce the risk of electric shock or cause a fire , do not expose this unit
to water or moisture.
Basic information :
1 It does not contain elements that can be self- repaired . In the event of a
breakdown , please contact your authorized service representative.
2 Before connecting the appliance , check that the outlet voltage parameters
correspond to the connected device .
3 Be sure to provide adequate air circulation around the device - it is prohibited to
install the unit in tight , built-up areas .
4 This device is intended for indoor use .
5 In the case of prolonged non-use of the device , disconnect it from the power
source.
6 The maximum permissible ambient temperature is 45oC .
7 Do not connect this unit's power with other devices.
8 Remember that the device is plugged into an outlet having the ground .
9 The device must be installed for permanent , secure structure.
Features:
Aluminum housing with plastic components .
Specifications:
Supply Voltage:AC230V 50-60Hz
Power: 15W
LED 3X3W RGB 3in1
Control: Auto , DMX512
AUTO mode
Utilizing located on the unit switches DIP switch , set it by . the following table .
No switch switch No. Function
ON OFF
1 2 , 3, 4 , 5, 6 , 7, 8 , 9, 10 Red
2 1 , 3, 4 , 5, 6 , 7, 8 , 9, 10 Green
3 1 , 2, 4 , 5, 6 , 7, 8 , 9, 10 Color blue
1 , 2 , 3, 4 , 5, 6 , 7, 8 , 9, 10 RGB turnover ( variable)
