Page 6
Chapter 3. Installing the Cabinet
The RadioRouter BaseStation cabinet is shipped completely assembled, shrouded in cardboard,
and mounted on a shipping pallet. The pallet is 35” L x 30” W x 6.75” H.
WARNING:
THE RADIOROUTER BASESTATION INDOOR CABINET WEIGHS
APPROXIMATELY 650 LB. AND IS TOP HEAVY. CARE MUST BE TAKEN
TO HANDLE THE CABINET PROPERLY WITHOUT DANGER TO THE
INSTALLATION PERSONNEL OR OTHER NEARBY EQUIPMENT.
Equipment that can be used to move the base station is described in
Chapter 1. Overview
.
Procedure 3-1 Removing the Cabinet from the Pallet
When this procedure is completed, the cabinet will be free to move directly into place.
Alternatively, the cabinet can be placed onto a flat dolly to facilitate moving the cabinet through
narrow equipment aisles. See
Figure 1.1 Flat Equipment Dolly
.
1.
Remove the cardboard shroud and discard.
2.
Inspect the cabinet for damage. If there is any damage, fill out the Punchlist in
Appendix
B - RadioRouter BaseStation Installation Punchlist
. If the damage is minor and does
not prevent continuation of the installation procedures, continue with the installation. If
the damage prevents continuation of the installation, contact the Project Manager for
instructions.
RadioRouter
®
BaseStation Installation Guide — Draft
Version 0.5 - © 2003
Page 6
Содержание RadioRouter
Страница 2: ...Intentionally blank page RadioRouter BaseStation Installation Guide Draft Version 0 5 2003...
Страница 10: ...Page 8 Intentionally blank page RadioRouter BaseStation Installation Guide Draft Version 0 5 2003 Page 8...
Страница 50: ...Page A 2 Alarm sensor cables RadioRouter BaseStation Installation Guide Draft Version 0 5 2003 Page A 2...