Flann Microwave SD5902, Руководство по эксплуатации и обслуживанию

Страница: 17 / 19

Flann Microwave SD5902 Waveguide Switch Driver
SD5902 Doc No ER15 Version 1.3 June 2020
17
Remote Command Summary
Command
Function
A1 Move Waveguide Switch ‘A’ to Position 1
A2 Move Waveguide Switch ‘A’ to Position 2
A3 Move Waveguide Switch ‘A’ to Position 3
A4 Move Waveguide Switch ‘A’ to Position 4
A? Respond with Waveguide Switch ‘A’ Position
B1 Move Waveguide Switch ‘B’ to Position 1
B2 Move Waveguide Switch ‘B’ to Position 2
B3 Move Waveguide Switch ‘B’ to Position 3
B4 Move Waveguide Switch ‘B’ to Position 4
B? Respond with Waveguide Switch ‘B’ Position
P Set Precision Mode
S Set Speed Mode
H Respond with Waveguide Switch Opto Data
*RST Reset Switch Driver
Note that this command will terminate USB communication with the instrument until it is
explicitly re-established.
*IDN? Respond with Instrument Identification
*STB? Respond with Status Byte
ADDRSETnn Change GPIB Address to nn (GPIB Only)