FLAMMA EF172D, Инструкция по эксплуатации

Страница: 43 / 160

43
TIMER
NOTE: This setting only applies to normal mode. This allows the unit to
switch to standby mode after a certain period.
Press the button to switch between the settings OFF and 0.5 hours to
9 hours. The timer logo and time are displayed on the screen. The heater must
be in the ON position. The heater can be operated automatically using the daily
timer and the weekly timer on the remote control. Set the day, time and your
desired temperature.
Press the button to activate the remote control. Press and hold the M button
for three seconds to display the settings screen. Press the and button to
select the day, time or your desired temperature. The selected function is high-
lighted. Press the ‘+’ and ‘-’ button to set the value.
• Time: 24-hour system
• Select your desired temperature from 15 – 25 °C .
• Temperature unit: °C , °F
TIMER FOR DAILY HEATING
The following times are preset heating times that can be altered if desired.
6:00 a.m. to 8:30 a.m., 5:00 p.m. to 10 p.m.
Press the M button until
D
is displayed in the upper right corner of the screen
and then enter the daily heating interval. Press and hold the arrow button for
six seconds to display the daily timer settings. Maximum three heating periods
per day.
• Press or to select hour or minute, press ‘+’ or ‘-’ to set the time.
• The minute indicator will increase/decrease by 15 minutes per press.
• Press and hold the button for three seconds or wait 10 seconds to save
and exit the heating time setting.
EN