16
EXTERIOR AIR INTAKE
Since the Lieutenant has been approved for installation in mobile homes, it is equipped with an optional
exterior air intake kit. The procedure for installation of the exterior air intake is as follows:
Rear wall connection
Determine the position on the wall, cut out a 4" (152 mm) diameter hole, position the screen from outside and
join the insulated duct from the screen to the attachment flange on the back of the pedestal of the stove.
.
NOTE:
Spacing between the wall and the insulated duct will be sealed with silicone in order to insure
continuity to the vapor barrier.
Attach the unit to the floor using the two screws provided for this purpose
.
AIR CIRCULATION SYSTEM
In order to improve air circulation in the room where the wood stove is installed, certain options are available
for specific stove models.
Blower:
A variable speed-control blower is available. Consult your dealer.
Thermodisc kit:
Available on most models, the thermodisc is a sensor that connects to the blower`s
electrical supply cord, and it will start the blower when the stove`s temperature reaches
120
°
F (49
o
C) and cut off power when the stove cools down below 100
°
F (37
o
C).
Information regarding installation of the thermodisc is included with the device. Consult
your dealer.
