flamco FlexFiller Direct G4, Инструкция по установке и эксплуатации

Страница: 11 / 36

We reserve the right to change designs and technical specifications of our products.
11
ENG
6.2 Technical datasheet
WRAS approval number
KUKreg4: 2202704
WRAS: 2203331
General
Size of the unit (Height x Width x Depth) 359mm x 225mm x 141mm
Dry weight 4 kg
Connection details
Cold water inlet 15mm Compression
System outlet 15mm Compression
Drain (via Tundish) 22mm Compression &
32mm PP push fit &
32mm PP solvent weld
Maximum inlet pressure 6 Bar
Maximum cold fill pressure 5.7 Bar
Maximum design pressure PN10
Nominal flow rate (at 2 Bar) 14l/min
Electrical details
Supply voltage 110/230 Volt
Frequency 50 Hz
Full load current 1 Amp
Fuse rating 5 Amp
Maximum load BMS relays 5 Amp
Protection class IP44
Environmental data
Power consumption (Standby) 2 W
Power consumption (Filling) 19,4 W
Operation conditions
Maximum temperature at inlet: 45°C
Maximum temperature at outlet: 90°C
Ambient temperature range: 5°C / 45°C
Storage conditions
Temperature 5°C / 45°C
Humidity 60….70% relative humidity, non-considering
Keep the unit in a locked, frost free and dry area, protect the unit from solar & thermal
radiation, vibration, from electrically conductive gases, explosive gas mixtures and
aggressive atmosphere.