sTeP 5a – attach Platform f2 to step h
Have 2 people hold the second Platform F up to Platform
Step H while the third person attaches the two pieces with
(3) Bolts Z, (6) Washers HH, and (3) Nuts AA
(Order: bolt,
washer, platform/step, washer, nut)
– Do not Tighten bolts
until the end of this step.
sTeP 5B – attach poles e1 and e2 to Platform f2
While one person remains holding the platform have the
other two people grab Poles
E1** and E2**
. Attach Pole E1
on the open corner of the second Platform F that is on the
same side as Pole C, using (1) Bolt Z, (2) Washers HH and (1)
Nut AA
(Order: bolt, washer, platform/ring, washer, nut).
Attach Pole E2 on the open corner that is on the same side
as Pole D with (1) Bolt Z, (2) Washers HH and (1) Nut AA
(Order: bolt, washer, platform/ring, washer, nut).
imPorTaNT!
Tighten the bolts from Steps 4
and
5 before moving on to
step 6
pArtS
Second Platform F
(2) Pole E
(5) Bolt Z
(5) Nut AA
(10) Washer HH
**at this point the poles are the same. It does not matter which pole you attach in which spot. Once they are attached though,
we will reference Pole E1 and E2 appropriately to address the correct side of the structure.
sTeP 5B
sTEP 5A
d
c
a
B
sTeP 5a
sTEP 5B
slide
Q
sTair
V
f2
f1
h
32”
32”
32”
44”
32”
32”
StEp 5 – Attach Platform F2 to Platform F1
e1
e2
f2
sT
eP
h
