clim
BiNg
Pole
StEp 7 – Attach spinning Bead Wall to Platform F2
sTeP 7a – attach ring clamps to spinning Bead Wall
Loosely, fasten (1) Ring Attachment Clamp Top EE and (1)
Bottom DD to one end of the top of Spinning Bead Wall P1
using (2) Ring Bolts W and (2) Ring Nuts X. Repeat for other
top side of Wall P1.
sTeP 7B – attach spinning Bead Wall to Platform f2
Fasten the clamps on the top of Wall P1 to Attachment Rings
on Poles C and E1 that are
86.5” from the ground.
Insert
(3) Bolts Z, (3) Washer HH through Second Platform F from
underneath into Pre-Threaded Posts of Wall P1. Tighten all
Bolts in this step.
imPorTaNT!
Tighten all bolts in this step
before moving on to step 8
pArtS
Spinning Bead Wall P1
(2) Ring Clamp EE & DD
(4) Bolt W
(4) Nut X
(3) Bolt Z
(3) Washer HH
sTeP 7B
sTeP 7a
f2
e1
d
e2
h
P
Bead
Wall
sTe
P h
/ P
laT
form
f1
44”
44”
44”
c
86.5”
86.5”
