Flama 727FL, Инструкция по эксплуатации

Страница: 15 / 28

13
English
any other liquid.
Only use the power base provided with the Electric Kettle.
To fill the Kettle, always remove it from the power base, to
prevent water from overflowing onto it.
Never fill the Kettle above the maximum level indicator, marked
on the water level indicator, as boiling water may spill out.
Never switch on the Electric Kettle without water in it.
Never switch on the Electric Kettle with the lid open.
Never run the Electric Kettle when the power base is wet.
When it is switched on, the body of the Kettle heats up.
Use only the handle of the Electric Kettle to move it around.
If the Kettle is too hot, allow it to cool down before filling it with
cold water.
Please disconnect the appliance from the power supply by
removing the plug from the fixed power socket after each use
and when cleaning.
Clean the outside of the Electric Kettle and the power base with
a dry, absorbent cloth.
Never immerse the kettle or the power base in water or any
other liquid for cleaning.
Do not use the appliance if it is not working properly, or if it is
in any way damaged. Any intervention other than cleaning must
be carried out by an Authorized FLAMA Technical Assistance
Service.
Do not use the appliance if the power cord or plug are damaged.
Do not attempt to replace the power cord or plug as this is a
dangerous operation. Have them replaced immediately at an
Authorized Flama Technical Assistance Service.
This product complies with the Low-Voltage and Electromagnetic
Compatibility Directives.
This instruction manual is also available in PDF format at www.
flama.pt.