Heat recovery unit RDKS - Technical manual
27
FläktGroup DC_9295GB_20190326_R5
We reserve the right to make changes without prior notice
After configuring the settings, press “Confirm” and continue to the
next step.
Option 1
- Use the
±
buttons.
Option 2
- Enter the desired value, confirm with .
Configure the settings for the supply air fan in the same way.
Here you set the desired supply air temperature (setpoint). Note:
This value is not to be confused with the desired indoor tempera-
ture, which is managed by the domestic heating system. The
recommended setpoint is 16–19 °C. The factory setting is 18 °C.
CONTROL PANEL OPERATION, COMMISSIONING
