background image

Air Heating unit ACJB - Technical manual

4

FläktGroup DC_9170GB_20190117_R2

We reserve the right to make changes without prior notice

CONTROL PANEL RDKZ-41-1

The operating mode is selected via the external control panel RDKZ-41-
1, which should be installed in a suitable place, either on a wall or in a 
wall box. Press the arrow button to select operating mode. The activat-
ed mode is indicated by a LED. 

CONTROL PANEL RDKZ-41-1, OPERATION

Figure 2. Operating modes on control panel (RDKZ-41-1).

NORMAL

SUMMER MODE

FILTER ALARM

FORCED

Arrow button

(for selecting operating mode)

Figure 1. Control panel RDKZ-41-1 with mains lead.

NORMAL MODE

The air heating unit automatically controls the fan speed to maintain 
the desired temperature.

FORCED MODE

The fan goes up to maximum flow. This function can be used to dis-
tribute surplus heat through the house, for instance if a heating stove 
is used. 
The unit operates in forced mode for 120 minutes, and then returns to 
NORMAL mode. If forced ventilation is required for only a short time, it 
can be terminated manually by pressing the arrow button and select-
ing NORMAL mode. 

Figure 3. Setting of desired temperature.

SET DESIRED TEMPERATURE

The temperature is set via control panel RDKZ-41-1. 

1.  Check the current set temperature by pressing either the * or  

# button once. 

  Then count how many times the NORMAL and FORCED symbols 

flash.

Note that the NORMAL symbol indicates tens and the FORCED symbol 
indicates ones.

Example:

 If the NORMAL symbol flashes twice and the FORCED symbol 

flashes three times, the temperature is currently set at 23º C. 
2.  To change the temperature, press * to reduce it or # to increase it.
3.  After setting the desired temperature, press ARROW to save and  

return to normal mode on the control panel. 

SUMMER MODE

Each press reduces 

the set temperature 

by 1 °C

Each press raises 

the set temperature 

by 1 °C

Indicates ones 

(1–9)

Indicates tens 

(10–90) 

NORMAL

FORCED

Saves the set 

temperature

Содержание ACJB

















Отзывы: