WORKING LOAD:
150 lbs for the OTG1 Platform Seat (PB1)
250 lbs for the OTG2 Platform Seat (PB1-2 and PB2)
300 lbs for the OTG3 Platform Seat (PB1-3 and PB3)
Take time to familiarize yourself with the use and maintenance of this
equipment before using. Please keep this Instruction Sheet in an
accessible location. The Instruction Sheet must be read and familiar to
anyone who is using the Platform Seat. If this Instruction Sheet is
misplaced, please visit the product page on the FlagHouse website or
email (
) for a replacement.
IMPORTANT
Please check equipment immediately for any damage that may have occurred in shipping.
Contact FlagHouse immediately if there is a damaged piece 800.793.7900 (US & International)
or 800.265.6900 (Canada).
GENERAL INFORMATION
The Platform Seat comes with a stretch cord to make the platform board easier to move from
place to place and store. When ready to use the seat, carefully release the stretch cord from
the suspension chains.
While the seat is in use, place the cord in the swing bag or in a safe place
of reach of the intended occupant.
There are two spring clip connectors; one for each pair of suspension chains. Open the spring
clip of each connector and place into the swing’s ‘easy glide’ connection. The proper orientation
of the ‘easy glide’ connection is shown here for clarity; the chain connector goes into the
bottom opening of the ‘easy glide’ connection.
