Both views below show the chain connectors installed. Make sure the spring clips have closed
properly. The position shown to the left is for linear movement of the swing. If rotation is
desired, place both connectors in the single point connection. This is shown in the view to the
right.
PLATFORM SEAT DETAILS
•
The Platform Seat is vinyl covered padded swing that is moisture/wear resistant and
easy to clean.
•
The swing is suspended with vinyl covered chains. Unlike ropes, the vinyl covered chains
are easy to clean.
•
The individual can receive therapy laying on stomach or sitting. Think of it as a seat or a
moving working desk. Top choice by Occupational Therapists!
•
Do not remove the spring clips, or elastics bands, from the chains. They keep the proper
chains together and ensure the swing is hung the next time as intended.
•
If additional assistance is needed to help keep the individuals on the platform seat, an
optional ‘Low Tone Attachment’ is available.
TO ASSURE CONTINUED SATISFACTION AND SAFETY OF THE SWINGS,
PLEASE PERFORM THE NECESSARY WEAR INSPECTIONS AS DETAILED
IN THE “MECHANICAL COMPONENT WEAR INSPECTION” SECTION BELOW.
MECHANICAL COMPONENT WEAR INSPECTION
The Seat Chains and Seat Ubolts have some amount of relative movement while the swing is
being used. Under normal use, all of these components would not experience significant wear
for years. However, under extreme heavy daily use, some of these components may experience
wear much sooner and may need replacing.
As a matter of safety, all of these components should be checked every six months.
