INSTRUCTION MANUAL
Electrical winches LM90A/LM250A
Réf : 1813000156
Page :
5/17
Version : 23/21
During the operations of lifting, up and down,
the user must constantly observe the load and the
free end of the cable to prevent any risk of collision.
The load must be constantly guided (EN14492-2);
otherwise the use of rotation-resistant wire rope is
necessary.
Check and apply local regulations concerning
the installation, use, maintenance and control of
lifting devices.
See also contraindications §2.6
1.7
Anchoring
Verify that the anchoring point is strong enough for
the effort to apply.
If the anchoring is not provided by FIXATOR each
anchor must withstand, without any deformation, up
to 2.5 times the WLL of the winch, that is
2.5x90=225 kg (respectively 2.5x250=625 kg for a
WLL of 250kg), and remain stable when subjected
to this load.
(special case of reeving 2:1, the resistance must be
of 5 times the WLL, that is 450 kg (respectively
1250kg); see §2.1.3)
Minimal withstanding of the hoist and/or pulley
anchorage :
If the fixing of the unit must be in a dangerous place
for the operator, the safety precautions provided for
by the
work’s
regulation must be taken to exclude
any risk uncontrolled in this operation. It is perhaps
better in this case to implement the hoisting cable
into the device before the anchoring operation.
