Fitout SD 01, Руководство по эксплуатации продукта

Страница: 44 / 45

44
Maintenance Plan:
The following maintenance plan is according to DIN 79000. According to DIN
79000, it is the duty of the customer to comply with the following plan and
document all inspections. The person performing the inspection should be
competent to do so. Any failure may result in the product not being according to
DIN 79000 and may void warranties. Also adhering to the maintenance plan will
make your products last longer. Please contact us in case you need any
assistance.
The inspection is divided into three parts depending on the frequency of the
inspection; weekly routine, monthly operational and annual inspection. The
frequency of the inspections should be increased in areas where there is more
frequent use, where there is more vandalism and areas that are close to the sea.
For example it may be a good idea to do a daily inspection instead of a weekly
inspection in a heavily used area such as a school.
To prevent any accidents and damages, defects that are detected should be
repaired immediately. It may be a good idea to close the product to public use
before necessary repairs are done. Please contact Flopark for any help or any
spare parts requirements.
Weekly routine inspection:
•
Check for obvious signs of damage, such as broken parts, missing parts, sharp edges.
•
Check for loose bolts.
•
Make sure the foundation is not exposed.
•
Check moving parts to make sure they are in good condition and that the movement
is smooth.
•
Check safety surfacing to ensure that it is not damaged.
•
Check for any dents or scratches and use touch up paint to cover them. This is to
prevent rusting.
•
Check the safety zone around the products to make sure that it is free from any
other objects and that the surface is clean and free from debris, broken glass etc.
•
Check the product markings. If removed, or if they cannot be read, ask for
replacements.
Monthly operational inspection:
•
Repeat the steps for the weekly routine inspection.
•
Repeat all the moves in the products. Make sure the torsion system works properly.
•
Check for any excessive wear. Check all fixations.
•
Check for any signs of corrosion.
•
Check all bolts to see if any are loose. Retighten if necessary.
•
Make sure all seats, grips, foot pedals etc. are secure.