Fitnex X5, Руководство пользователя

Страница: 10 / 35

OVERVIEW
8
POWER SWITCH
The power switch is located on the side of the treadmill near the power
cord. The power switch has two positions - ON and OFF. The display
console will beep when the treadmill is plugged in and the power switch
is pressed ON.
CIRCUIT BREAKER RESET
The circuit breaker is located next to the power switch. Should an
electrical overload occur due to a surge in electricity or other situation,
the circuit breaker will disconnect to prevent any damage from occurring
to the treadmill.
If the treadmill suddenly stops with no lights visible nor beep heard, reset
the circuit breaker. To reset the circuit breaker press the button firmly.
The display console should restart and a beep should be heard.
CAUTION
If the power cord is warm to the touch a problem may exist with the
electrical outlet in which the treadmill is plugged. It may be necessary to
plug the treadmill into a different outlet.
POWER CORD
Plug the power cord into a properly grounded electrical outlet, keep
power cord clean of treadmill wheels during operation. Replace the
power cord if it is damaged or pinched. Damage to the power cord could
result in a fire hazard or cause personal injury through electrical shock.
XT5