background image

3

WARNINGS

NEVER use the stationary bike if it is not properly/completely 
assembled or is damaged in any way.
NEVER use Flex Bike Ultra™ when sick or fatigued.
NEVER exceed the weight limit for this bike. The weight limit for 
this bike is 300 pounds. Do not use the Flex Bike Ultra™ if your 
body weight is in excess of 300 pounds.
ALWAYS wear proper attire and footwear that fully covers your 
feet. Long hair should be tied back or tucked away. Ensure that  
any shoelaces are tucked into your shoes.
ALWAYS warm up/stretch before starting to exercise.
ALWAYS be cautious when getting on and off the Flex Bike 
Ultra™.
ALWAYS wait until the pedals have come to a complete stop 
before taking your feet off of the pedals or dismounting. Do not 
stand or climb on the handlebars.
ALWAYS keep hands away from moving parts and ensure that 
hands are never placed where there is no rubber handlebar grip. 
NEVER overexert yourself or work to exhaustion. If you feel faint, 
dizzy, short of breath, or if you have chest or other pains, STOP 
IMMEDIATELY! Consult your physician before using the Flex 
Bike Ultra™ again. 
ALWAYS ensure that you have a water bottle filled with at least 
12 oz. of water and a towel close by to absorb sweat from your 
body and the handlebars.
NEVER use the Flex Bike Ultra™ in a standing position at high 
revolutions per minute (RPM).
ALWAYS keep your pelvis positioned over the center line of the 
Flex Bike Ultra™ stationary bike.
NEVER adjust the resistance of the flywheel and the resistance 
of the Flex Bike Ultra™ Handlebar System whilst standing.
NEVER use accessory attachments that have not been 
recommended by the manufacturer – using these attachments 

Содержание Flex Bike Ultra

























Отзывы: