FitLogic freewill d225, Руководство пользователя

Страница: 14 / 79

13
4. To set up the CALORIES, press “MODE” button to enter into calories count
down, the CAL window will display «50» and glitter. Press «»,
«INCLINE-» «SPEED+», «SPEED-» to set up the calories that you need. The
setting range is 10-999.
5. When setting is finished, press «START» button to start up, the treadmill will
run after 3 seconds, press «», «INCLINE-», «SPEED+», «SPEED-» to
adjust the speed and the incline; press the PAUSE, the treadmill will stop.
Preset programs:
This treadmill has 12 preset programs. Under the standby status, press
“PROGRAM” button, the window of “SPEED” will P1-P12. After choosing the
program that you need, the TIME window will flash and display the preset
time10:00, press “”,”INCLINE-”, “SPEED+”, “SPEED-” to set up the
exercise time that you need. Press “START” button to start the preset program.
The preset program is divided into 10 sections. Each exercise time=the setting
time/10. When the system enters into the next section, it will make 3 sound
“Bi—Bi—Bi“, then the speed and the incline will be changed according to the
setting speed and incline of the program, then press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to change the INCLINE and SPEED as you need. When the
program enters into the next section again, the system will make 3 sound
“Bi—Bi—Bi“, then the speed and the incline will become the speed and the incline
of the preset program automatically. After the program is completed, the system
will make 3 sound “Bi—Bi—Bi”, and the treadmill will decrease the speed slowly to
END. After 5 seconds, the treadmill will become standby state.