FitLogic freewill d225, Руководство пользователя

Страница: 13 / 79

12
9. When the treadmill is under standby state, press both SPEED+ and
for about 3 seconds. You will hear the buzzer make a sound «BI», then the
changes between Kilometer and Mile will be finished.
START-UP QUICKLY (MANUAL):
1. Put the power switch on, and then attach the safety key to the computer.
2. Press START/STOP button, the system will enter into 3 seconds count-down,
the buzzer will make the sound «Bi» and the TIME window will start to count
down, then the speed will run 1.0km/hour after 3 seconds.
3. After start-up, you can use speed up or down to adjust the speed up or down.
The operation of exercise process:
1. Press speed-down will decrease the running speed.
2. Press speed-up will increase the running speed.
3. Press incline-down will decrease the incline level.
4. Press incline-up will increase the running level.
5. Press PAUSE will reduce the speed until the treadmill stops.
6. When the user holds the hand pulse about 5 seconds, it will display pulse data.
Manual mode:
1. When the treadmill is under the standby state, press START button, the
treadmill will start to run from the speed 1.0km/h and the inline of “0” level. The
other windows will also start to count up from “0”, press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to change the incline and speed.
2. Set up the TIME, press «MODE» button to enter into time count-down, the
TIME window will display «15:00» and glitter. Press «», «INCLINE-»,
«SPEED+», «SPEED-» to set up the time that you need. The setting range is
5:00-99:00.
3. In TIME setting mode, press «MODE» button to enter into distance count-down,
the DISTANCE window will display «1.0» and glitter. Press «»,
«INCLINE-» , «SPEED+», «SPEED-» to set up the distance that you need. The
setting range is 0.5—99.9.