Fisheye FIX NEO Mini 1000 SWR FS, Руководство пользователя

Страница: 20 / 28

- 20 -
1. Uninstall the battery holder from the bodey case.
2. Insert the AC plug of USB AC adapter to the power
outlet.
3. Put the A terminal of USB cable into the port.
4. Put the micro B terminal of USB cable into the socket
of the battery holder.
5. Make sure that the LED on the battery holder turns
red.
6. The LED turns to green when charging is complete. (Charging time is 4 hours maximum)
7. Remove the USB cable from the battery holder.
8. Pull out the USB AC adapter from the power outlet.
- Do not charge on paper, carpet or anything flammable as battery and charger may
become hot.
- Do not charge with coiled cables as heat build-up may result in fire.
- Do not handle with wet hands or charge under wet conditions to avoid electric shock.
- Make sure that no debris or water drops on the charging connector terminal before
charging. If there is any dirt or water drops, clean it thoroughly. It may cause not only
damage to the product but the risk of electric shock.
- Do not charge any batteries that have been flooded, or are suspected of having water
intrusion.
- The USB AC adapter is multi-volt compatible (100–240V), but using at a resort or on a
cruise ship with in-house power generation may cause highly unstable voltage output
and result in damage to the charger. It is recommended to use a converter with a
built-in safety circuit.
- Charge in a stable position to avoid the plug being disconnected from vibration, impact
shock or dropping.
- Do not leave the battery and the charger in temperatures above 30°C (86°F) or in
direct sunlight.
Charging method for battery
The LED remains green when the battery is fully charged. NOTE
WARNING
CAUTION
DANGER