Fisheye FIX NEO Mini 1000 SWR FS Скачать руководство пользователя страница 16

- 16 -

- This product is designed to be used to the depth of 100 meters (330 ft.). Use of this product at 

greater depths may cause damage or flood.

- Read this manual thoroughly to prevent accidental misuse, water intrusion or damage. Perform 

inspections and maintenance before and after each use of this product.

- Do not place or store this product in extreme high or low temperatures. Heat or temperature 

changes may warp the sealing surfaces and cause the light to flood or prematurely deteriorate 
O-rings.

- Do no open or attempt to seal the light in environments where an excess of sand, dirt, lint, dust, or 

animal hair are present. These elements and other free floating bodies may breach O-ring sealing 
surfaces and cause the light to flood or other components to fail to function properly.

- Remove the main O-ring when flying. Due to altitude pressure differential, if the O-ring is not 

removed, the light head may be hard to open.

- If this product produces a particular noise or emits any odor or smoke, remove the battery and 

contact your local dealer immediately.

- In the event of a flood, turn off the power immediately and remove the battery. Use caution when 

handling the battery to avoid electrical shock. Use caution when opening a flooded light. Pressure 
may be built up inside the light causing the light head to eject from the light body once the light head 
is loosened.

- Do not use any organic solvents such as alcohol, benzene or thinner as they may deform the 

sealing surfaces of the light.

CAUTION

Содержание FIX NEO Mini 1000 SWR FS





























Отзывы: