Fisher VPC-HD1, Инструкция по эксплуатации

Страница: 82 / 202

75
English
EXPOSURE SETTING
3
Select the desired icon from the
manual exposure menu, and press
the SET button.
<If
T
,
g
or
,
was selected>
1
Toggle the SET button up or down
to select ND filter, aperture value
or shutter speed.
2
Toggle the SET button left or right
to change the setting for the
selected parameter.
4
Press the SET button.
h
This completes the exposure
setting.
HINT
i
To prevent the effects of camera shake at slow shutter speeds, it is
recommended to use a tripod or other method to stabilize the camera.
i
A slow shutter speed may be useful for photographing in a darker
environment, but noise in the image may be increased.
i
To minimize noise in the image, enable the noise reduction function
(page 126).
i
The manual exposure setting automatically becomes
@
if the scene
select function is active or if the mode is set to the AE shift sequential shots
mode.
i
In the sequential shots mode, the shutter speed is faster than 1/15 sec.
i
When a video clip is recorded in a video mode other than
T
with the
shutter speed set to slower than 1/29 sec., the shutter speed during
recording is 1/30 sec. And when a video clip is recorded in the
T
video
mode with the shutter speed set to slower than 1/59 sec., the shutter
speed during recording is 1/60 sec.
i
If the exposure setting is
,
and the ISO sensitivity set is other than
t
(page 83), the exposure correction setting will be disabled.
F3.5
1/1500
Shutter speed
Aperture
ND filter