Fisher PCG-06, Инструкция по установке, эксплуатации и обслуживанию, Страница: 48 / 66

HYDRONIC CASSETTE 48
3. Press
TIMER
button again to enter into off timer programming mode. Press
DAY
button to
select the required day of the week. Master unit will then retrieve the setting from the
selected slave unit and timer display area will show “rEAd”. The off timer setting will be
shown upon reading the data successfully. Press
TIME
or
TIME
button to change the off timer
setting.
4. Upon completion of changing timer settings for the selected day, press
TIMER
button again
to exit timer programming mode. The settings will then upload to the selected slave unit.
The next day of the week settings can be done only upon completion of sending data to the
slave units. (Repeat steps 1~4 if setting is required for the next day of the week).
5. In Global control mode:
 Pressing Master
CANCEL
button for 3 seconds will cancel all timer settings in all slave
units.
 Timer settings will be broadcast to all slave units.
Clock synchronization by master unit is as follows:
1. Press
TIME
and
TIME
buttons for 3 seconds to activate clock synchronization to all slave
units. Master wall pad will respond with a beeping sound.
4) Key lock
In order to prevent unauthorized access to the system setting, a key lock function is provided to
prevent mischief. Hold down
and for 3 seconds to activate key lock, symbol lights up.
Repeat the same to exit key lock. Only button is applicable in key lock mode.
5) Swing
Press
SWIN
G
to activate or deactivate swing function.
6) Sleep
Press
SLEEP
button to activate or deactivate sleep setting. Sleep is valid in cool or heat modes only.
7) Temperature setting
Press or to enter into temperature setting mode, temperature display area blinks indicating
the current set temperature. Press the above buttons to adjust the set temperature.
8) Mode setting
Press
M O D E
button to change the operation mode.
9) Fan speed setting
Press
FAN
button to change the fan speed. Only low speed is available for dehumidification mode.
10) On/Off control
Press to start or stop the air conditioner.