Fisher Scientific Isotemp, Руководство пользователя

Страница: 33 / 42

O I
CAL
!
°C
°C
This icon represents the timer. It is used to set the amount of time required, in hours and minutes, before the
bath turns off. When the bath turns off the alarm, if enabled, will beep.
O I
Press, and hold, the arrow keys to change the time.
Once the desired value is displayed press
to save the change or
x
to reset the time to
zero. Press to return to the home screen.
Note
You can only set an off time if the bath is
running.
Changing a Setting
Press the soft key below to display the Setting screen.
O I
00:00
x
95. °C 0
x
These icons represent the audible alarm status. The top indicates it is enabled, the bottom
indicates disabled. Press
to toggle between enabled/disabled. Use the arrow keys to
highlight another setting or press to return to the home screen.
This icon represents the high temperature alarm. If the reservoir fluid exceeds this temperature
the bath will shut down and, if enabled, the alarm will sound. The controller will also have an
error display,
.
Press, and hold, an arrow key to change the
temperature. Once the desired value is displayed
press
to save the change or
x
to
not save the change.
Press to return to the home screen.
appears on GPD Baths only.
Use the arrow keys to highlight the desired setting. Press
to make changes.
4-4 | Isotemp Fisher Scientific
Chapter 4
| Operation