Fisher Scientific Isotemp, Руководство пользователя

Страница: 32 / 42

Changing the Set Point
The set point is the desired reservoir fluid temperature. You can change the set point with the
bath running or not. From the home screen press either arrow key to display:
When operating without a lid, limit the maximum set point to 60°C.
29.9°C
50.0°C
x
Press, and hold, the arrow keys to bring up the
desired set point value. The range is 5°C to 104°C.
Once the desired value is displayed, in this case
50.0°C, press the soft key below
to save
the change or press the soft key below
x
to not save the change.
Note
After a 30 second delay if neither key is pressed the display returns to the home screen,
any change is
not
saved.
Viewing/Changing the Shaker Speed
(SWB only)
You can view/change the shaker speed value with the bath running or not. From the home screen
press the soft key below
to display:
Press, and hold, the arrow keys to bring up the
desired value. The values are 0 and 30 to 200.
Once the desired value is displayed press
or to save the change and return to the
home screen.
2 RPM 0
CAUTION
Isotemp | 4-3 Fisher Scientific
Operation |
Chapter 4