4-5
Section 4
Operation
Timer Setting
(continued)
(5) Then, the following display will appear asking whether you want to
start the timer operation or not:
(6) If you want to save the new timer setting and to start the timer
operation, you are required to change ‘NO’ to ‘YES’ by turning the
Control Knob and press it for confirmation as shown below:
(7) When the timer operation ends, you will be alerted by audible
signals as well as the following display:
Terminate the timer operation either by pressing the RUN/STOP Button
or by turning off the main power switch.
• The allowed timer range is between 1 minute and 99 hour 59 minu-
tes.
• You can cancel the timer setting any time.
• You can check the current timer setting by pressing the timer button
when the unit is not operating.
• If you press the timer button during operation, the elapsed time of
the timer operation will be displayed for 20 seconds. If you press the
timer button once again, then a new timer setting mode will begin.
• You can terminate the timer operation at any time by pressing the
RUN/STOP button.
