4-4
Section 4
Operation
Timer Setting
This unit provides two types of timer mode: immediate timer activation
and delayed timer activation. (For selecting the timer mode, see
Selection of the Timer Mode.)
For both timer modes, the timer setting procedures are the same:
(1) Press the Timer Button to begin the timer setting and also to check
the display showing the current timer setting. Note that the hour
frame is blinking first as shown below:
(2) If you want to change the timer setting, select and then save the
desired values into the hour frame and the minute frame by turning
the Control Knob and pushing it for confirmation as shown below:
(3) As soon as you confirm the timer setting, the unit will display the set
temperature for verification as shown below:
(4) If the set temperature is correct, press the Control Knob for
confirmation. If not, turn the Control Knob to select the desired value
and then press it for confirmation. The following display will appear
momentarily:
