Packing List
The following items are packed in the envelope located
inside the freezer chamber. If any of the following items
are not present, report the missing item to your local
Fisher representative.
1. Instruction Manual
3. Door Lock Key
4. Power Switch Key
5. Chart Recorder Instructions
(Catalog No.ʼs with “R”)
Selecting a Location
Choose a location for the freezer that will provide
at least
three inches of clearance
between the cabinet and any
adjacent vertical surface at the sides and rear.
Appropriate electrical power must be available. Locate
the freezer within 6 feet of the power outlet so that no
extension cord is required.
An installation instructions form is attached to the
front of the unit. After installation, confirm that the
unit was installed per these instructions, that the
required information was completed and that the form
was faxed to the specified number.
Installing and Leveling Casters
Freezers are shipped with four unattached threaded cast-
ers. Casters screw directly into the weld nut in each cor-
ner of the base of the unit. Use the wrench provided to
thread the casters completely into the base of the unit.
Back the casters in or out until the unit is level and resting
on all four casters. See figure 1.
U
NPACKING AND
I
NSTALLATION
Freezer Base
Thread casters directly
into base at four corners.
Tighten using
wrench provided.
Note
The freezer must be level in order to
provide adequate condensation
drainage as well as proper door
alignment and operation. The freez-
er should be in its final operating
location and set so that it is firmly
positioned on the floor.
5
Figure 1
