Reversing the Front Door
(Model 97-920-1)
•
Remove bolts and plugs using a screwdriver.
•
Unscrew the bolts connecting the upper hinges to
the upper platform. Remove the upper platform by
first pulling it forward and then lifting it upward.
•
Remove the door by unscrewing the bolts in the
upper hinges.
•
Remove the buffer by unscrewing the bolts on both
of its sides.
•
Break off the part behind the buffer through which
the lower hinges pass using a knife or your hands.
•
Remove the lower hinge and mount it on the other
side tightening its bolts.
•
Remove the hole-plugs of the door handle with a
knife.
•
Fit the hole-plugs of the door handle to the other
side.
•
Fit the buffer to its place.
•
Mount the door to its place.
•
Fit the upper hinges into their places. Do not tighten
the bolts, but leave them loose.
•
Adjust the vertical and parallel position of the door
by eyesight then tighten the bolts of the upper
hinges.
•
Fit the upper platform into its place.
•
Fit the bolts connecting the upper hinges and the
upper platform, but do not tighten them.
•
Adjust the upper platform until it is level then tighten
the bolts in operations.
•
Fit the plugs of the upper platform.
12
O
PERATION
