Fisher Scientific Fisher Sei 100L Gravty, Руководство по эксплуатации

Страница: 19 / 63

Fisherbrand 50145736 | 11
Installation | Chapter 3

Place the oven on a floor stand (option; to be ordered separately), never on the lab floor.

Consider installing one dedicated upstream circuit breaker per oven to avoid multiple device
failures in case of an electrical fault.
Intermediate Storage
When the oven is placed in intermediate storage, which is permissible for a maximum of four
weeks, make sure that the ambient temperature is between 20 °C to 60 °C (68 °F to 140 °F) and
the maximum relative humidity does not exceed 90%, non-condensing.
Room Ventilation
Heat dissipating from the oven during continuous operation may cause a change in the room
climate.

Therefore, the oven must only be installed in rooms with sufficient ventilation.

Do not install the oven in room recesses without ventilation.

When several devices are to be placed in the same room, additional ventilation may have to
be provided as necessary.

To avoid any impact of the heat dissipated by the oven on the ambient climate the room must
be vented by means of a laboratory-grade ventilation system that complies with applicable
local and national health and safety regulations and has sufficient capacity.

If excessive temperatures tend to occur in the operating room, be sure to provide a thermal
protection means that cuts out the power supply to mitigate the impact of overtemperature
scenarios.