33
Comprehensive Operating Manual & Guide to Metal Detecting
PRO-ARC
22
PRO-ARC
Comprehensive Operating Manual & Guide to Metal Detecting
47
PinPoint Feature (continued)
How to Pinpoint
Position the searchcoil an inch or two (2.5-5cm) above the ground, and to the side of the
target. Then pull the trigger. Now move the searchcoil slowly across the target, and the sound
will indicate the target's location. As you sweep from side to side, and hear no sound at the
ends of the sweep, the target is located in the middle of that zone, where the sound is loudest
and the audio pitch is highest. If the sound is loud over a wide area, the buried object is large.
Use the PinPoint feature to trace an outline of such large objects.
Narrow It Down
To further narrow the field of detection, position the searchcoil near the center of the
response pattern (but not at the exact center), release the trigger, and then pull it again.
Now you will only hear a response when the searchcoil is right over the top of the target.
Repeat this procedure to narrow the zone even further. Each time you repeat the
procedure, the field of detection will narrow further.
34
Static All Metal Mode
This mode is useful for finding large, deep objects, i.e. larger than a coin and deeper than 12
inches (30cm). STATIC functions similar to PinPoint but occupies a different position on the
user interface. The audio signal gets stronger as the searchcoil approaches the ground. Unlike
the other modes, the detection sound will not disappear if you stop moving the searchcoil.
The four adjustments are performed the same as with MOTION All Metal Mode, as described
on the preceding page.
THRESHOLD
The audio threshold in the Static Mode is internally fixed and cannot be adjusted by the user.
Retuning: The audio threshold will slowly drift when searching in this mode. If you move
quickly between temperature environments, such as from shade to sun, audio threshold
may drift more rapidly until the searchcoil temperature stabilizes. When the audio
threshold drifts in this fashion, pull the trigger back momentarily to retune the detector.
You will need to retune periodically when searching in this mode.
AUDIO PITCH
Works the same as in MOTION Mode; see previous page.
SENSITIVITY
Set the sensitivity high enough too hear some random background noise and/or a slight
amount of ground response. If you do not hear these noises, you will sacrifice detection depth.
33
Comprehensive Operating Manual & Guide to Metal Detecting
PRO-ARC
22
PRO-ARC
Comprehensive Operating Manual & Guide to Metal Detecting
47
PinPoint Feature (continued)
How to Pinpoint
Position the searchcoil an inch or two (2.5-5cm) above the ground, and to the side of the
target. Then pull the trigger. Now move the searchcoil slowly across the target, and the sound
will indicate the target's location. As you sweep from side to side, and hear no sound at the
ends of the sweep, the target is located in the middle of that zone, where the sound is loudest
and the audio pitch is highest. If the sound is loud over a wide area, the buried object is large.
Use the PinPoint feature to trace an outline of such large objects.
Narrow It Down
To further narrow the field of detection, position the searchcoil near the center of the
response pattern (but not at the exact center), release the trigger, and then pull it again.
Now you will only hear a response when the searchcoil is right over the top of the target.
Repeat this procedure to narrow the zone even further. Each time you repeat the
procedure, the field of detection will narrow further.
34
Static All Metal Mode
This mode is useful for finding large, deep objects, i.e. larger than a coin and deeper than 12
inches (30cm). STATIC functions similar to PinPoint but occupies a different position on the
user interface. The audio signal gets stronger as the searchcoil approaches the ground. Unlike
the other modes, the detection sound will not disappear if you stop moving the searchcoil.
The four adjustments are performed the same as with MOTION All Metal Mode, as described
on the preceding page.
THRESHOLD
The audio threshold in the Static Mode is internally fixed and cannot be adjusted by the user.
Retuning: The audio threshold will slowly drift when searching in this mode. If you move
quickly between temperature environments, such as from shade to sun, audio threshold
may drift more rapidly until the searchcoil temperature stabilizes. When the audio
threshold drifts in this fashion, pull the trigger back momentarily to retune the detector.
You will need to retune periodically when searching in this mode.
AUDIO PITCH
Works the same as in MOTION Mode; see previous page.
SENSITIVITY
Set the sensitivity high enough too hear some random background noise and/or a slight
amount of ground response. If you do not hear these noises, you will sacrifice detection depth.
