Fisher Research Labs Gold Bug, Руководство пользователя

Страница: 7 / 20

34
Relic-Hunting and Coin-Shooting
with the Optional 11” DD Searchcoil
While the Gold Bug
®
is a high performance, specialized gold prospecting metal
detector, it is also a good multi-purpose detector. With the purchase of an 11”
DD searchcoil, you can bring more power to your coin-shooting and relic-
hunting searches.
The standard 5” Gold Bug
®
searchcoil is engineered for precision and is best at
finding the smallest gold nuggets that most other gold prospecting detectors
would miss.
If you want a larger sweep area and deeper detection, the 11” DD should be
considered.
Advantages of the 11” DD searchcoil are:
1. Deeper detection
2. Broader sweep (cover more area in less time)
For information about the 11”DD searchcoil
(Part# 11COIL-GB, MSRP=$199.95),
Please call 800-685-5050.
ASSEMBLY
Assembly is easy and
requires no tools.
●
1
Position S-rod upright.
●
2
rotate the LOCKING
COLLAr fully in
the
counterclockwise
direction.
● 3
Insert your finger
inside the tube and
make sure the INTerNAL CAM LOCK is flush with the
inside of the tube.
● 4
Insert the MIDDLe STeM into the S-rOD,
with the SILver BUTTON pointed upward
● 5
rotate the MIDDLe STeM until the SILver BUTTON
locates in the hole.
●
6
Twist the LOCKING COLLAr fully in the clockwise direction
until it locks.
● 7
repeat this process on the LOWer STeM.
● 8
Using the BOLT and KNUrLeD KNOB, attach the
SeArCHCOIL to the LOWer STeM.
● 9
Adjust the LOWer STeM to a length that lets you maintain a
comfortable upright posture, with your arm relaxed at your side,
and the SeArCHCOIL parallel to the ground in front of you.
●
10
Wind the CABLe securely around the STeMS, leaving slack at
the bottom.
● 11
Connect CABLe PLUG to housing.
Do not twist the Cable or Plug. Turn Locking ring only. Use
minimal finger pressure to start the threads. Do not cross-
thread. When the Locking ring is fully engaged over the
threaded connector, give it a firm turn to make sure that it is
very tight. When the Locking ring is fully engaged over the
threaded connector, it may not cover all of the threads.
●
12
Tighten both LOCKING COLLArS.
S-ROD
LOCKING
COLLAR
INTERNAL
CAM LOCK
SILVER BUTTON
MIDDLE
STEM
S-ROD MIDDLE STEM
●
2
● 3
● 4
*
Note: very tall users can purchase the optional extended
Lower Stem (TUBe5X), for extended reach.
Caution:
Forcing in MIDDLe STeM with CAM
LOCK raised may form a burr on
camlock. If this happens, remove
burr with knife to allow insertion.
Locking
Collar
Locking
Collar
S-Rod
Velcro
Strap
Velcro
Strap
Knurled
Knob
Bolt
Searchcoil
Hand-
grip
Searchcoil
Cable
Lower
Stem
Middle
Stem
Cable
Plug
S-ROD MIDDLE STEM
● 4
● 5
7