W9638
fi sher-price.com
• Please keep this instruction sheet for future
reference, as it contains important information.
• Requires two “AA” batteries (included)
for operation. Batteries included are for
demonstration purposes only.
• Adult assembly is required for battery
replacement. Required tool: Phillips
screwdriver (not included).
• Wipe the toy with a clean, damp cloth. Do
not immerse. This toy has no consumer
serviceable parts. Do not take apart.
For best performance, we recommend
replacing the batteries that came with this toy
with two, new “AA” (LR6) alkaline batteries.
• Locate the battery compartment door. Loosen
the screw in the battery compartment door
with a Phillips screwdriver. Remove the
batteries and properly dispose of them.
• Insert two “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries
for longer battery life.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• When sounds or lights from this product
become faint or stop, it’s time for an adult to
change the batteries.
• If this product begins to operate erratically, you
may need to reset the electronics. Slide the
power switch off and back on.
1,5V x 2
“AA” (LR6)
• Slide the switch ON or OFF .
• This toy will turn off after about one minute of
inactivity. Press any button to restart!
• Start by inserting one of the end posts on the
rail into end slot in the base.
• Press near the bottom of the post to “
snap
”
in place.
• Repeat this procedure to “
snap
” the remaining
posts in place.
Hint:
The rail is designed to break-away from the base.
Simply reassemble it using the assembly procedure.
• A plastic tab was attached to the toy for
in-store demonstration purposes. While the
tab may have already been removed, check
the bottom of the toy to be sure. If a plastic
tab is still attached, pull and remove the tab.
Throw the plastic tab away.
