Assembly
Assembly
• While pushing down on the seat, insert the seat retainer
pin through the hole in the seat and into a seat mount
adjustment hole.
17
Seat Retainer Pin
• Fit the retainers to the handle.
• Insert three #10 x
3
/
4
" screws through each retainer and
into the handle. Tighten the screws with a Phillips screw-
driver. Do not over-tighten.
18
Retainer
Handle
8
8
19
• Position the handle on a flat surface so that the retainers
are upright.
• Fit the trike onto the handle so that the rear frame rests in
the grooves in the handle and the front wheel fits between
the retainers.
• Fit the handle covers onto the rear frame and handle, near
the rear wheels.
• Insert two #10 x
3
/
4
"
screws through each handle cover
and into the handle. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
Assembly is now complete.
Handle
Retainers
Trike
Retainer
