Assembly
Assembly
4
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the assembled rear wheel on the scrap block
of wood.
• Slide the other rear wheel (spoke side up) onto the end of
the straight axle.
• Place a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer.
Gently pull the rear
wheel up to be sure the cap nut is securely attached
to the straight axle.
• Set the frame assembly aside.
Cap Nut
Rear Wheel
Straight Axle
Spoke Side Up
Assembled
Rear Wheel
• Fit two pedal axle covers onto the pedal axle metal tabs.
Make sure the metal tabs fit into the slot in each pedal
axle cover.
5
Pedal Axle Cover
Pedal Axle
Metal Tab
Slot
Pedal Axle Cover
• While holding the pedal axle covers on the pedal axle,
insert the pedal axle into the hole in the center of the
front wheel.
6
Pedal Axle Covers
Pedal Axle
Hole
Front Wheel
• Push the pedal axle covers into the center of the front
wheel until they are flush with the surface of the
front wheel.
7
Pedal Axle Covers
• Turn the front wheel assembly over.
• Insert a pedal axle cover onto the top of the pedal axle
and into the hole in the center of the front wheel.
• Insert the remaining pedal axle cover below the pedal axle
and into the hole in the center of the front wheel.
8
Pedal Axle Cover
Pedal Axle Cover
Pedal Axle
5
5
Scrap Block
of Wood
