• Insert the knobbed end of the footrest up through the
opening in the underside, center of the frame .
• Rotate the footrest
1
/
4
turn .
• Slide the footrest toward the handlebar as far as it will go
until the top of the footrest is positioned over the opening’s
rectangular cut-out.
• Lower the knobbed end of the footrest into the rectangular
cut-out in the frame .
Assembly
Assembly
• Turn the frame upright.
• Insert the fork post up through the hole in the neck of the
frame. Make sure the fork is positioned so that the fork
covers face the rear wheels.
• Place the handlebar over the fork post and push it down
onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.
• Insert the #8 x 3" screw through the hole in the handlebar
and into the fork post. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
13
Handlebar
Frame Neck
Fork Covers
Fork Post
14
Frame Opening
Footrest
Knobbed End
7
7
• Place the frame cover over the frame opening. Make sure
that the holes in the frame cover align with the holes on
the frame.
• Insert three #10 x
3
/
4
" screws into the frame cover and tight-
en with a Phillips screwdriver. Do not over-tighten.
15
Frame Cover
• Place the seat on the seat mount.
• Adjust the seat for your child’s comfort by aligning the hole
in the seat with one of the seat mount adjustment holes.
16
Seat Mount Adjustment Holes
Seat
Seat Mount
2
➥
➥
3
➥
1
2
3
1
