manualshive.com logo in svg

Fisher-Price POWER WHEELS LittlePeople Tot Rod, Руководство пользователя с инструкциями по сборке, Страница: 11 / 24

Поделиться
Скачать
Fisher-Price POWER WHEELS LittlePeople Tot Rod Скачать руководство пользователя страница 11

11

TM

Assembly

• Press the tab under the back of the seat and lift to

remove the seat.

• Fit the rectangular opening in the cowling over the 

shifter handle.

• Align the front, side and rear tabs on the cowling with

the slots in the vehicle body but do not snap the tabs
into the slots.

• Make sure the harness wires are positioned in the

vehicle body channel to prevent them from being
pinched between the cowling and vehicle body.

TM

Cowling

Shifter

Handle

Side
Tabs

Side
Tabs

Rear Tab

Harness Wires

Front Tabs

Front Tabs

Channel

PRESS COWLING HERE 

To Snap Front Tabs

PULL VEHICLE

BODY UP HERE 

To Snap Front Tabs

• Press firmly on the front of the cowling to snap the four

front tabs into the slots in the vehicle body. Make sure
the side and rear tabs stay aligned with the slots.

Note: Pull up on the front of the vehicle body while
pressing down on the cowling to make sure the front 
tabs snap into the slots.

6

7

• Slide a washer onto one of the front axles.

• Slide a short bushing, ring side first, onto the same 

front axle.

• Slide a wheel onto the front axle.

• Slide a long bushing, tube side first, onto the front axle.

• Fit a cap nut on the end of the front axle.

• Fit the cupped end of the cap nut assemby tool over 

the cap nut and tap the end of the cap nut assembly 
tool with a hammer to secure the cap nut on the end 
of the axle.

• Repeat this procedure to assemble the remaining front

wheel (and a washer, short bushing, long bushing and
capnut) to the other front axle.

Wheel

Short

Bushing

Washer

Long

Bushing

Front Axle

Cap Nut
Assembly
Tool

Cap Nut

5

Ring Side

Short

Bushing

.437"

.437 Cap Nut

Long

Bushing

Tube Side

Washer

G4626pr-0920  5/28/04  1:29 PM  Page 11

Содержание POWER WHEELS LittlePeople Tot Rod

























Отзывы:

Нет отзывов