background image

2

Prevent serious injury or death from falls 
or sliding out:

•  The child should at all times wear a safety 

harness correctly fitted and adjusted. The tray 
is not designed to hold the child in the chair.

• It is recommended that only children capable 

of sitting upright unassisted use the high 
chair in the upright position.

• Always keep child in view while in the 

high chair.

• Never leave child unattended.
• Do not use the high chair unless all 

components are correctly fitted and adjusted.

Prevent injury from burns:

 Do not place this 

high chair near open fires or any hot surfaces.

WARNING

CAUTION

This package contains small parts 

in its unassembled state. 

Adult assembly is required.

2

Consumer Information

IMPORTANT! 

Place the high chair on a level, stable surface 

away from electrical flexes. Be sure to keep electrical flexes out 
of child's reach.

• Please read these instructions before assembly and use of 

this product.

• Adult assembly is required.
• Tool needed for assembly: Phillips screwdriver (not included).
• Product features and decorations may vary from photographs.

Great Britain:

 Vanwall Business Park, Maidenhead SL6 4UB. 

Helpline: 01628 500303. www.service.mattel.com/uk.

Australia:

 Mattel Australia Pty. Ltd., 658 Church Street, 

Locked Bag #870, Richmond, Victoria 3121 Australia. 
Consumer Advisory Service 1300 135 312.

New Zealand:

 16-18 William Pickering Drive, 

Albany 1331, Auckland.

Asia:

 Mattel East Asia Ltd, Room 1106, South Tower, 

World Finance Centre, Harbour City, Tsimshatsui, HK, China.

Malaysia: 

Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd. 

(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran 
Tropicana Golf Country Resort, 47410 PJ. Tel: +603-3341 9052.
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.

Содержание L0542

















Отзывы: