8
• Fit the strings on each toy into the slot in each mobile hanger.
• Pull the toy down to be sure it is secure.
15
Assembly
Battery
Compartment
1,5V x 4
“D” (LR20)
• Loosen the screws in the battery compartment door
with a Phillips screwdriver and remove the battery
compartment door.
• Insert four “D” (LR20)
alkaline
batteries into the
battery compartment.
• Replace the battery compartment door and tighten
the screws.
Note:
Low battery power may cause product movement to
slow, sound to become faint or product to turn off all together.
If this should happen, replace the batteries with four
alkaline
"D" (LR20) batteries.
Hint:
We recommend using
alkaline
batteries for
longer battery life.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids
that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removeable, rechargeable batteries are used, they are only to
be charged under adult supervision.
Battery Installation
• Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities
(Europe only).
