7
• Fit the pad clips around the edge of the seat bottom.
11
• Turn the seat face down.
• Fit the frame tube connector to the pegs on the seat bottom.
Hint:
You may need to turn the seat tube to fit it to the pegs
on the seat bottom.
• Insert four #8 x 1,9 cm screws into the seat tube and tighten
with a Phillips screwdriver.
12
Frame Tube
• Turn the frame assembly on its side.
• Fit the end of the frame tube
between
the fabric panel and
the frame hub.
• Slide the frame tube into the motor assembly tube.
13
Fabric Panel
Motor Assembly Tube
Frame Tube
Frame Hub
Assembly
14
• First, fit an M5 lock nut into a hole in the motor assembly tube.
• Next, insert an M5 x 3,2 cm bolt through the opposite hole in
the motor assembly tube.
• While holding the lock nut in place, tighten the bolt with the
Allen wrench.
• Turn the assembly upright.
Clips
