3
Assembly
Hint:
The ladder may be factory assembled.
• At an angle, fit a peg on the ladder into a
slot in the back of the body. Push to
“snap”
the other side of the ladder in place.
• The ladder is designed to break away from
the body. If it comes off, simply follow the
steps above to assemble it!
4
• First,
“snap”
the bottom of the leg onto the
body
A
. Then,
“snap”
the top of the leg
onto the body
B
.
Hint:
The legs are designed to fit onto the
body one way. If the leg does not seem to fit,
try the other leg.
• Repeat this procedure to assemble the
remaining leg to the body.
1
•
“Snap”
each arm onto the upper body.
Hint:
Each arm is designed to fit onto the
body one way. If an arm does not seem to fit,
try the other arm.
2
2
•
“Snap”
the tail onto body.
Hint:
The tail is designed to fit onto the body
one way. If it does not seem to fit, turn it
around and try again.
3
3
Ladder
Arm
Leg
Tail
A
B
