4
3
9
ASSEMBLY
F
H4433pr-0920
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause
a chemical burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely. Do
not dispose of batteries in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be
charged under adult supervision.
1.5V x 3
"AA" (LR6)
Shown Actual Size
Dash
• Position the dash on the vehicle.
• Make sure the motor harness connector wire is through the groove
in the dash.
• Insert a #10 x
1
/
2
" screw through each of the two corner dash tabs
nearest to the passenger compartment
A
.
• Insert a #10 x 1" screw through the two dash tabs nearest to the
battery compartment
B
.
• Insert a #10 x 1" screw into the hole in the center of the dash
B
.
• Tighten the screws.
Motor
Harness
Connector
Wire
B
A
A
B
B
A
B
Dash
Sound Box
• Replace the sound box in the dash.
• Replace the three screws and tighten them.
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustration.
• For best results, avoid repositioning a label once it has been applied
to the vehicle.
5
HI
LO
KC
11
4
12
19
10
18
