H4433pr-0920
10
ASSEMBLY
F
H4433pr-0920
6
Dash
Key
Assembly
• Insert and
“snap”
the key assembly into the opening in the dash,
as shown.
7
• Wipe the steering column with a paper towel to remove any
excess lubricant.
• Turn the vehicle on its side.
• Insert the straight end of the steering column up through the hole in
the vehicle floor and out through the hole in the dash.
• While holding the steering column in place, turn the vehicle upright.
Steering
Column
Hole
Bottom View
• Position the steering wheel so that the large opening and the tab on
the steering wheel stem are both UP.
• Fit the steering wheel onto the end of the steering column.
Steering
Wheel
Steering
Column
8
Tab UP
Large Opening UP
Side View
• Fit the steering wheel cap into the center of the steering wheel.
• Insert two #8 x 1" screws and tighten.
• Insert the
5
/
32
" x 1
1
/
2
" pin through the hole in the end of the
steering column.
• Lower the steering column so that the pin fits inside the center of
the steering wheel.
9
End of
Steering
Column
5
/
32
" x 1
1
/
2
" Pin
10
Steering
Wheel
Cap
