Installation and Use
Gate Door
➤
• Slide the gate door until both pads contact the other
opening surface.
• If the gate door will not slide far enough to contact the
other surface:
✓
Make sure the locking lever is unlocked. (See Installa-
tion and Use step
).
✓
The opening may exceed 36". Do
NOT
use
the
Step Lock Gate in this location.
To open gate door:
• Grasp the handle on the gate door.
• Press and hold the release button while lifting the gate
door to release the door hook.
Please Note:
The threshold is raised up from floor surface.
When walking through the gate, please be sure to step up
over the threshold.
• Before locking the Step Lock Gate in position:
✓
Make sure
at least three of the four pads
contact
the surfaces.
✓
Make sure the Step Lock Gate is completely vertical
by checking to see if the top pads are directly aligned
above the bottom pads.
✓
Make sure the locking lever is
unlocked
. (Make sure
the top of the triangle on the locking lever aligns with
the top of the triangle on the threshold.)
✓
Make sure the threshold is flat on the floor.
• Step down on the locking lever
until you hear a "click"
.
Threshold
➤
➤
Locking Lever
➤
Bottom
Pad
➤
Top Pad
➤
Handle
Door
Hook
Door
Release
Button
➤
➤
Bottom
Pad
Top
Pad
➤
➤
➤
Top
Pad
➤
Bottom
Pad
➤
➤
Door
Hook
Door Release
Button
© 1997 Fisher-Price, Inc., East Aurora, New York 14052
79151 1 79151-0920
3
•
Always test to be sure the Step Lock Gate is secure
after each installation.
✓
Firmly shake the Step Lock Gate to be sure it is
securely in place.
✓
Check to be sure
all four pads
are contacting
the surfaces.
✓
Check to be sure the locking lever is completely down
and locked.
✓
Check to be sure the gate door is closed.
• If the Step Lock Gate is not secure, remove it from
the opening, and repeat Installation and Use steps
–
.
Installation is now complete.
